| REAMER SIZE |
I.D. TOLERANCE OVER BASIC SIZE |
| Up to
1/4" |
+.0005 to
+.0008 |
| 1/4" to
1" |
+.0006 to
+.0010 |
| Over 1" |
+.0008 to
+.0012 |
ANSI & ECONOMY STANDARD LENGTH
BUSHINGS
Specify quantity, ANSI number and hole size.
OIL GROOVE BUSHINGS
Specify quantity, ANSI number, hole size and oil
groove style (and, or) wiper style, if required.
KNURLED BUSHINGS
Specify quantity, ANSI number and hole size.
REAMER BUSHINGS
Reamer bushings have the tolerances listed above.
These bushings are priced as specials.
TERMS AND CONDITIONS
All prices and terms subject to change without
notice.
Standard bushings purchased from stock in resaleable condition may
be returned prepaid within 30 days after shipment is made subject to inventory conditions
and only with our written consent. A 15% restocking charge will be made.
Specials, extended range, and carbide bushings are not returnable.
All shipments are +/- 10%, unless otherwise requested.
MlNIMUM ORDER
THERE IS A $50.00 MINIMUM ON ALL
ORDERS.
Economy Bushing Co. | Economy Power Trans.
How to Select |
Catalog | Order Info. |
Contact Us